Dynapac DFP10D, Инструкция по эксплуатации и техническому обслуживанию

Страница: 79 / 98

9. Assemble the V-belt guard (1) with fastening screws (2).
10. Check the V-belt tension again after 25 operating hours,
tighten if necessary.
8.7.3.1 Checking the frequency of the base plate
Keep feet and hands clear of the vibrating base plate.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running machine.
Protective equipment: n Working clothes
n Hearing protection
n Safety shoes
Tool: n Sirometer
1. Park the machine on a rubber mat.
2. Start the engine
Ä
Chapter 6.1 ‘Starting the engine’
on page 52 .
3. Run the machine at maximum speed for one minute.
4. Check the base plate’s frequency with a suitable measuring
instrument (e.g. Sirometer).
ð
Nominal value: Ä Chapter 2 ‘Technical data’ on page 11
5. Park the machine safely Ä Chapter 6.4 ‘Parking the machine
in secured condition’ on page 57 .
6. If frequency incorrect:
n Check the engine speed.
n Check the V-belt.
n If necessary, contact our customer service.
B-834-0144
1
2
Fig. 70
Maintenance – Annually
DFP10D 79