Dynapac DFP10D, Инструкция по эксплуатации и техническому обслуживанию

Страница: 75 / 98

10. Insert the oil filter into the housing and press it against the
end stop.
11. Before tightening the screw, make sure that the tensioning
springs (1) touch the oil filter with both ends.
12. Tighten the screw.
13. Fill with new engine oil.
14. Screw the oil dipstick in.
15. After a short test run check the oil level on the dipstick; if nec-
essary, top up to the top dipstick mark.
16. Check oil filter and drain plug for leaks.
17. Dispose of oil in line with environmental regulations.
8.7.2 Checking, adjusting the valve clearance
NOTICE!
Danger of engine damage!
We recommend to have this work carried out by
trained personnel or our after sales service.
– Before checking the valve clearance let the
engine cool down.
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.4
‘Parking the machine in secured condition’ on page 57 .
2. Let the engine to cool down to ambient temperature.
1
B-HAT-0056
Fig. 58
Filling in engine oil
OIL
B-HAT-0063
Fig. 59
Concluding work
Preparations
Maintenance – Annually
DFP10D 75