Dynapac DFP10D Скачать руководство пользователя страница 44

Страница: 44 / 98

5.1 Notes on safety

If the following tests reveal damages or other defects, the machine

must not be operated, until these deficiencies have been corrected.

Do not operate the machine with defective indicators and control

elements.

Safety installations must not be removed or made ineffective.

Do not change any fixed settings.

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protec-

tion regulations must be followed when han-

dling fuels and lubricants

Chapter 3.4 ‘Han-

dling fuels and lubricants’ on page 23

WARNING!
Danger of injury caused by rotating parts!

–

Before starting work on the machine make sure

that the engine can not be started.

Park the machine safely

Chapter 6.4 ‘Parking the machine

in secured condition’ on page 57

Checks prior to start up – Notes on safety

DFP10D

Содержание DFP10D



































































































Результаты поиска

Содержание DFP10D

Отзывы:

Похожие инструкции для DFP10D

Бренды по названию

Популярные бренды

Dynapac DFP10D, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание DFP10D

Отзывы:

Похожие инструкции для DFP10D

Бренды по названию

Популярные бренды