Dynapac DFP10D, Инструкция по эксплуатации и техническому обслуживанию

Страница: 78 / 98

3. Loosen the fastening screws (2) and remove the V-belt guard
(1).
4. Slightly loosen the fastening screws (2) on both sides.
5. Pull the engine carrier forward, remove and replace the V-
belt (1).
6. Install the new V-belt and pull the engine carrier back.
7. Tighten the fastening screws (1) on both sides.
8. Check tension of V-belt, tighten if necessary.
ð
Compression measurement: approx. 5 mm (0.2 in).
B-834-0144
1
2
Fig. 66
2
B-834-0170
1
Fig. 67
1
B-834-0171
Fig. 68
Fig. 69
Maintenance – Annually
DFP10D 78