Dynapac CC 501, Операция

Страница: 5 / 28

3 CC 501/501C O501EN3
SAFETY INSTRUCTIONS (Also read the safety manual)
1. The operator must be conversant with the contents of the OPERATION
MANUAL before starting the roller.
2. Make sure that all instructions in the MAINTENANCE MANUAL are
followed.
3. Only trained and/or experienced operators are allowed to drive the
roller. Passengers are not allowed on the roller.
4. Never use the roller if it is in need of adjustment or repairs.
5. Board and leave the roller only when it is stationary. Use the grips and
railings that are provided.
6. Always use the ROPS (Roll Over Protective Structure) when the
machine is used on risky ground.
7. Drive slowly in sharp bends. Keep to the recommended driving speed.
8. Avoid driving at an angle on slopes; drive straight up or down.
9. When driving close to unsafe edges or holes, ensure that at least two-
thirds of the drum width is firmly on material that has already been
compacted.
10. Ensure that there are no obstacles in the direction of travel, on the
ground or overhead.
11. Drive extra carefully on uneven ground.
12. Use the safety equipment provided. Always wear the seat belt on
machines fitted with ROPS.
13. Keep the roller clean. Clean dirt and grease from the operator’s platform
without delay. Keep all signs and decals clean and clearly legible.
14. Safety measures before refueling:
- Stop the engine.
- No smoking.
- No naked flame in the vicinity.
- Ground the nozzle of the filling device against the tank to prevent sparks.
15. Before repairs or service:
- Place chocks against the drums/wheels and against the strike-off blade.
- Lock the articulation if necessary.
16. If the noise level is higher than 85 dB(A) on machines that have no cab:
- Hearing protectors are recommended.
17. Make no changes or modifications on the roller that could affect safety.
Changes may only be made with the written consent of Dynapac.
18. Do not use the roller until the hydraulic fluid has reached its normal
working temperature. Braking distance can be longer than usual if the
fluid is cold. See starting instructions in the OPERATION MANUAL.