Dynapac CC 501, Операция

Страница: 17 / 28

15 CC 501/501C O501EN3
Pull up the parking brake knob (11) and check that the
brake warning lamp (10) is out.
BEFORE START, cont’d.
Operator’s station
11
10
Emergency stop - Check
Fig. 12 Instrument panel
11. Parking brake knob
10. Brake warning lamp
Fig. 13b Operator’s station
1. Seat belt
2. Rubber element
3. Anti-slip
1 2 3
Fasten the seat belt (1) provided if ROPS or a cab is
fitted on the roller and wear a protective helmet.
Always replace the seat belt with a new one
if it is worn or has been subjected to a heavy
load.
Check that the rubber elements on the platform
are intact. Worn elements will impair comfort.
Ensure that the anti-slip on the platform is in
good condition; replace with new anti-slip if
friction is poor.
Before starting, make sure that the field of view is
unobstructed, both in front and behind. All cab windows
must be clean and rearview mirrors properly adjusted.
Field of view
Fig. 13a Field of view