Dynapac CC 501, Операция

Страница: 12 / 28

10 CC 501/501C O501EN3
Items Designation Symbol Function
in fig. 4
28 Amplitude selector, front In HIGH mode,
the amplitude is 0.73 mm (0.03 in) and
centrifugal force is 187 kN/drum (42,040 lbf).
29 Amplitude selector, rear In LOW mode,
(CC 501 only) the amplitude is 0.37 mm (0.015 in) and
centrifugal force is 94 kN/drum (21,130 lbf).
Sequence selector Applies vibration on drum in relation to
(CC 501 only) direction of travel (on changing F and R).
30 Watering, operating contact MAN Controls the water flow to both the front and
MAN/AUT. O rear drums.
AUT MAN mode gives continuous watering.
Watering is OFF in the O mode.
The AUT mode gives automatic switching of
watering ON/OFF while driving forward or
reverse.
31 Vibration/Frequency meter FREQ Switches on the vibration/frequency meter.
(optional equipment for CC 501) METER
32 Rev control (Diesel) Released/engaged by the center button.
Pull out to increase engine revs. Push in to
reduce. Turn/screw the handle for fine
adjustment. Counterclockwise = increase
and clockwise = reduce.
33 - - -
34 Fuse box Contains fuses for the electrical system.
(on side of steering column) See under the heading “Electrical system” for
description of function for the different fuses.
35 Locking pedal Disengages the control table to turn to left
or right operator’s position.
36 Sprinkler system (tires) Controls the flow of water to the tires.
Continuous/intermittent Continuous or intermittent watering.
(CC 501 only)
37 Handbook compartment Pull up and open the top of the compartment
for access to handbooks.
INSTRUMENTS AND CONTROLS, FUNCTIONAL DESCRIPTION, cont’d.