manualshive.com logo in svg

Dynamix US-SE, Руководство пользователя, Страница: 76 / 105

Поделиться
Скачать
Dynamix US-SE Скачать руководство пользователя страница 76

Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual    V003

                                                          75 

 

4.4.3.2 802.11Q 

VLAN 

 

To modify the VLAN rule, move the cursor to modify and press enter. 

----------------------------------------------------------------------------- 
  Command: setup vlan modify <1~8> <0~4094> <string> 
  Message: Please input the following information. 
 

VLAN table entry index <1~8>: 1 

  VID value (ENTER for default) <1>: 10 
  VLAN port membership (ENTER for default) <111111>: 
----------------------------------------------------------------------------- 

 

The VLAN Port membership represents with string 1 or 0.   

VLAN port membership is a 6-digit binary number in which bit 0 to bits 5 represents LAN1 to 

LAN4, DSL and Sniffing ports respectively. 

For example: [ setup vlan modify 1 10 111111 ] means use index as 1 , VID = 10 and all six ports 

are as same membership (VLAN ID=10). 

 

Use PVID command to change the member port to untagged members: 

----------------------------------------------------------------------------- 
  Command: setup vlan pvid <1~6> <1~4094> 
  Message: Please input the following information. 
 
  Port index <1~6>: 
VID value (ENTER for default) <1>: 
----------------------------------------------------------------------------- 

 

PVID (Port VID) : It is an untagged member from 1 to 4094 of default VLAN. 

For example: 

[ set vlan pvid 1 100] 

[ set vlan pvid 2 100] 

[ set vlan pvid 3 100] 

[ set vlan pvid 4 100] 

[ set vlan pvid 5 100] 

[ set vlan pvid 6 100] 

Those means all untagged on all ports are as same membership (VLAN ID=100) 

 

To modify the link type of the port, move the cursor to link_mode and press enter. There are 

two types of link: access and trunk. Trunk link will send the tagged packet form the port and 

Access link will send un-tagged packet form the port. The port index 1 to 4 represents LANs 

ports, index 5 represents DSL and index 6 represents Sniffing respectively.   

 

----------------------------------------------------------------------------- 
  Command: setup vlan link_mode <1~6> <Access|Trunk> 
  Message: Please input the following information. 
 
  Port index <1~6>: 1 
  Port link type (TAB Select) <Access>: 
----------------------------------------------------------------------------- 

 

Содержание US-SE










































































































Отзывы:

Нет отзывов