manualshive.com logo in svg

Dynamix US-SE, Руководство пользователя, Страница: 28 / 105

Поделиться
Скачать
Dynamix US-SE Скачать руководство пользователя страница 28

Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual    V003

                                                          27 

 

 

3.5.2 VLAN 

 

Click VLAN to configure VLAN. 

 

 

 

VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple 

logical networks. Devices on a logical network belong to one group. A device can belong to 

more than one group. With VLAN, a device cannot directly talk to or hear from devices that are 

not in the same group. 

With MTU (Multi-Tenant Unit) applications, VLAN is vital in providing isolation and security 

among the subscribers. When properly configured, VLAN prevents one subscriber from 

accessing the network resources of another on the same LAN.   

VLAN also increases network performance by limiting broadcasts to a smaller and more 

manageable logical broadcast domain. In traditional switched environments, all broadcast 

packets go to each every individual port. With VLAN, all broadcasts are confined to a specific 

broadcast domain. 

 

User can choose two types of VLAN: 802.1Q Tag-Based VLAN and Port-Based VLAN. 

The VLAN Setup screen changes depending on whether you choose 802.1Q Tag-Based VLAN 

type or Port Based VLAN type in this screen. 

The IEEE 802.1Q defines the operation of VLAN bridges that permit the definition, operation, 

and administration of VLAN topologies within a bridged LAN infrastructure. 

 

 

 

Содержание US-SE










































































































Отзывы:

Нет отзывов