Dynamix US-SE, Руководство пользователя, Страница: 12 / 105

Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual V003
11
2.2 Rear Panel
The rear panel of G.SHDSL.bis EFM Modem is where all of the connections are made.
Connector Description
DC-IN P ower adaptor inlet: Input voltage 9VDC
CONSOLE RJ-45 for system configuration and maintenance
RST Reset button for reboot or load factory default
LAN (1,2,3,4) 10/100BaseT auto-sensing and auto-MDIX for LAN port (RJ-45)
MGMT RJ-45 for management port
DSL G.SHDSL .Bis interface for WAN port (RJ-45)
Frame Ground / Protective earth
2.2.1 WAN Port
The EFM modem have one port for WAN port connection, this is a G.SHDSL .Bis interface
The pin assignments for SHDSL line cable are:
For one pair (2-wire) model, Loop1 has been used
For two pair (4-wire) model, Loop1 and 2 have been used
For four pair (8-wire) model, Loop1, 2, 3 and 4 have been used