Dynamic SFC3, Руководство оператора

Страница: 68 / 141

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Data Entry 2-23
Date: 8/1/2019
Status Input Assignment
I/O
|
Status Input Assignment
User can select any one of status input and assign it to input point.
Assignment Comments
1 End Stream#1 Batch End the batch for Stream#1 and reset batch totalizer
2
End Stream#2 Batch
End the batch for Stream#2 and reset batch totalizer
3
End Stream#3 Batch
End the batch for Stream#3; reset batch totalizers
4
Alarm Acknowledge
Reset the previous occurred alarms output bit
5
Print Request
Step 1: set port 2 RTS type to 1 (printer type)
Step 2: When this status is activated, the Flow Computer will send
the "Request Report" to the printer via the serial port #2.
6
Request Prove Meter#1
7
Request Prove Meter#2
8
Request Prove Meter#3
9
Request Prove Meter#4
10
Request Prove Meter#5
11
N/A
12 Request Trial Prove Meter1
13 Request Trial Prove Meter2
14 Request Trial Prove Meter3
15 Request Trial Prove Meter4
16 Request Trial Prove Meter5
17 Request Trial Prove Meter6
18 Prover Ready (High) /
Upstream Polarity
19
Stream #1 Flow Direction
20
Stream#1 Product ID Bit 0
Stream#1 Product ID Bit 1
Stream#1Product ID Bit 2
Stream#1 Product ID Bit 3
Product ID Bits: Before ending batch, user can use status bits to
select next product. These bits are read immediately at batch end.
See the following table to specify a product.
21
22
23