Dynamic SFC3, Руководство оператора

Страница: 48 / 141

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Data Entry 2-3
Date: 8/1/2019
Load File
Use this function to exchange parameter values between the PC and the Flow Computer. After this action
is performed all parameter values in the Flow Computer and the currently active file in the PC are identical.
To read all current parameters from the Flow Computer to the currently active file in the PC, press the

function key; this is called “uploading”.
To write all current parameters from the currently active file in the PC to the Flow Computer press the

function key; this is called “downloading”.
View File
Unlike every other file function, View File does not act upon configuration files. Instead, View File allows
the user to view files that were previously captured in a report. For capturing data in a report, look for
these items under the
Report
menu header:
Prev. Hourly Data
Prev. Daily Data
Alarm Data
Audit Trail Report
TicKet Report
Auto Data Retrieval
Current Data
When viewing a file use PageUp and PageDown to browse through it.
Save As
Use Save As to save the parameters in the currently active file (that is, the parameter values currently being
edited) to a new file. You are prompted for the new file’s name of eight characters or less. If you enter the
name of a pre-existing file, the software informs you of this and prompts you for your file’s name again.
The original file will remain in memory.