Dynamic DX-REM34 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 69

Dynamic DX-REM34 Скачать руководство пользователя страница 17

No. 60025, Issue 5. January 1999

6 Installation and Testing

13

Two DXBUS

connectors

DX Dolphin Connection with the DX System

The Dolphin has two DXBUS connectors which
enables any DXBUS cable to be used to interconnect
it to the remainder of the DX system.

The Dolphin will normally be connected directly to
one of the two PM DXBUS connectors.

Note :

If only one DXBUS connector is used on the Dolphin and the

remaining connector is accessible to the wheelchair user, a dummy connector
should be fitted to the unused connector. This will comply with ISO7176.

The DXBUS cables are available in the following standard lengths:

DXBUS Cable, Straight, 0.12 M Part/Order Number GSM 630012
DXBUS Cable, Straight, 0.3 M Part/Order Number GSM 63003
DXBUS Cable, Straight, 0.5 M Part/Order Number GSM 63005
DXBUS Cable, Straight, 1.0 M Part/Order Number GSM 63010
DXBUS Cable, Straight, 1.5 M Part/Order Number GSM 63015

The DXBUS is also available with a ferrite.

DXBUS Cable, Ferrite, 2.0 M Part/Order Number GSM 63020F

Other cable lengths in multiples of 0.1 m are available on request.

Warning:

Any protruding screws should be either plastic or plastic coated to

prevent short circuits occurring with the DXBUS Cable pins.

«
...
15
16
17
18
19
...
»

Содержание DX-REM34






































































Отзывы:

Нет отзывов