5
Copyright © 2014 - 2022 by Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Operating determinations
The Mirror Head is a projector add-on device for creating
decorative effects. This product is only allowed to be
operated with:
-
the voltage labeled on the device
-
the projector that the product is specified for
-
the original accessories and add-on parts
The device is designed for indoor use only.
This device is designed for professional use only.
Do not shake or drop the device. Avoid brute force when installing
or operating the device. Take special care of the mirror.
When choosing the installation-spot, please make sure that
the device is not exposed to extreme heat, moisture or dust.
In order to safeguard sufficient ventilation, leave 0.5m of free
space around the device.
This device must never be operated or stockpiled in surroundings
where splash water, rain, moisture or fog may harm the device.
Moisture or very high humidity can reduce the insulation and
lead to mortal electrical shocks.
When using smoke machines, make sure that the device is never
exposed to the direct smoke jet and is installed in a distance of at
least 1.0 meters between smoke machine and device.
The ambient temperature must always be b5°C and
+35°C. Keep away from heaters and air-condition ventilations.
The relative humidity must not exceed 80% with an ambient
temperature of +35°C. The maximum ambient temperature
T=35°C must never be exceeded.
Never use the device during thunderstorms. Over voltage
could destroy the device. Always disconnect the device during
thunderstorms.
This device is only allowed for an installation via the original
mounting brackets or clamps.
Do not mount projectors to this unit that this unit was not
designed for.
Make sure that the area below the installation place is blocked
when rigging, de-rigging or servicing the fixture.
To prevent any damage to equipment or physical injury the
installation should be carried out by at least two persons.
Always fix the fixture with an appropriate safety bond depending
on the weight of the whole fixture.
For the use of closed-type riggings such as half-coupler clamps
secure the fixture with a safety cable (or other secondary
attachments) that is approved for the weight of the fixture, so
that the safety cable will hold the fixture if the primary attachment
fails.
It is important to select the mounting position of the Mirror Head
before starting the assembly.
The fixture can be clamped to a truss or similar rigging structure
in any orientation using one or more closed-type rigging clamps
such as half-coupler clamps that completely enclose the truss
chord. Only use certified equipment.
Operate the device only after having become familiarized with its
functions. Do not permit operation by persons not qualified for
operating the device.
Never use solvents or aggressive detergents in order to clean
the device especially the mirror. Rather use a soft and damp
cloth. Do not scratch or touch the surface of the mirror with any
object or by touching with the fingers.
Please use the original packaging if the device is to be transported.
Make sure that you pack the device in the original state and that
the transport-safety is always mounted.
Please consider that unauthorized modifications on the device
are forbidden due to safety reasons!
Never remove the serial from the device as this would make the
guarantee void.
If this device will be operated in any way different to the one
described in this manual, the product may suffer damages and
the guarantee becomes void. Furthermore, any other operation
may lead to dangers like short-circuit, burns, electric shock,
crash etc.
Version 2.7
