FLIGHT MANUAL
DYNALI HELICOPTER COMPANY
Edition N°3
DYNALI H2S January 2012
__________________________________________________________________________________
38
4.4.
START-UP
Seatbelts
Fastened
Doors
Closed and locked
Switch Governor
ON
Fuel
Checked and calculated
Weight and balance
Checked and calculated
Throttle
Full idle
Ignition
ON
Light indicators
Check switched ON (charge, Press, low RPM
Fuses
Check switched OFF
Fuel pumps
Running
Rudder pedals
Checked
Cyclic plate
Tested on 3cm course
Area
Safe and clear
Starter
START, engage to 800RPM
Temptrature coolant liq.
Wait until 50°C
RPM
Increase to 3500RPM
Temperature coolant. liq. Wait until 70°C
RPM
Increase to 5400RPM
Light low RPM
Check OFF
Free Wheel
Check by decreasing suddenly RPM
Instruments
Checked
Area
Clear
Note : in very cold climatic conditions, at least three minutes should be spent on the ground
with rotors turning at 100% to warm up the reduction gear and other bearings.
4.5.
TAKE-OFF
Vibrations
Not present
Hovering flight
Controls free, balancing correct
RPM
Stable
Weight and balance
Checked
Controls
Normal, free, no shimmy
T°
Min 70°C
Pressure
Min……bar
Manifold pressure
Min……inHg
Controls
Normal, free, no shimmy
Translation flight
Cleared for flight