Dynacord DPM 8016, Руководство по эксплуатации, Страница: 14 / 40

Number Element Description
7 POWER LED This LED illuminates green when the voltage supply
of the DPM 8016 (24 V) is connected. The LED
switches off when the DPM 8016 is disconnected
from the voltage supply or if the voltage supply is
switched off or fails.
8 USB interface Used to connect the DPM 8016 to a PC. For future
applications. See the Section Connections, page 17
Back
Figure 5.1:
Number Element Description
1 Power supply input (DC INPUT
24/48V) Connection for 24 V DC voltage. See
Section Power supply voltage, page 18
2 CONTROL PORT See Section Control port, page 22
3 STATUS LED See Section REMOTE CAN BUS, page
19
4 REMOTE CAN BUS interfaces
5 RS-232 interfaces See Section Connections, page 17
6 ETHERNET interface with status
LEDs The orange LED illuminates when an
Ethernet connection has been
established with another device. The
green LED illuminates briefly whenever
data is transferred. See Section
Ethernet, page 18
7 RESET key Briefly press the RESET key to restart
the DPM 8016. Press the RESET key for
at least 3 seconds to enter service
mode.
8 Network module slot See Section Installing extension cards,
page 25
9 Extension slots
5.2
14 en | Installation DPM 8016
16-Dec-13 | 02 | F01U259190 Operation manual