dynabook SATELLITE C50-H, Руководство по обслуживанию

Страница: 78 / 161

NO.
CONT.ON 31 PAGE NO.30
Copyright (C) 2020 Dynabook Inc., All Rights Reserved.
■
In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
■
In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
The detail of the error will be recorded to the WPETD log file as below.
Message Explanation Remarks
File Access Error. xx:. Failed in accessing the file.
XX is the USB drive letter.
Space Size Error. xx: There is no free space for creating the file.
XX is the USB drive letter.
Note:
If you need to test USB storage on differrent USB port, before the test, please prepare some USB storage and then insert them into
all the USB ports you want to test, or insert it into different USB port and start over the test if you have only one USB storage.
4) Test file
WinPETD.exe: Test program.
4-2-5 SD STORAGE Test
This test checks if the connection of the SD Port on the PC works by using a SD storage card.
You need to prepare a SD storage card.
The test writes some data to the SD storage card. The SD storage card needs at least 12 MB free space.
1) Test contents
The test detects a SD storage card plugged to the SD port on your PC. Then the test copies some data to the SD storage card, read
the data back from the SD storage card and compare it to the original data. If the comparison is OK, the test will say that the port is
passed.
Important Note
Do not take SD storage card out during SD STORAGE Test trying to check the port that SD storage card plugged in.
2) Test screen
▼
Drive information … The drive letter of the SD storage card being tested
▼
Test item … The test item being executed: File Access test.
▼
Progress status … The test progress
3) Result
■
In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
■
In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
Progress status
Drive information
dddddddddddddd
Test item