FS20 / FS213
13
8) Brush disc lifting and pressure application
1. To raise the brush pad, step down on the Brush
Lift Pedal until it locks in position
.
2. o lower the brush pad, slightly step on the Brush
Lift Pedal to unlock it, and raise it up slowly into
position
.
3. If you want to add the pressure to the brush pad,
lift the Pedal into position
. But this is just
extremely dirty place, you can not put the brush
in this position during your whole operation, or
the floor will be damaged.
（
FS20 models only
）
5. Battery placement and inspection
Batteries generally will be placed in
the machine before leaving factory,
when received new machine, please
check if the machine is damaged
during transportation, release the
fixing screw of water tank, the
machine shell could be backward
rollover, please check the following:
1) Whether the battery has a shift, the
connection is firm
；
2) The silencing box is fixed is intact.
3) whether there is a drop of goods.
back to normal after checking, fixed the screw.
●
FS20/FS213 same operation method
