FS20 / FS213
9
Preparation
1
）
choose super concentrated industrial floor cleaning agent supplied according to floor
pollution state:
Normally, only mix 1/4 cup(the normal one time using
paper cup) detergent into 1 tank water. (as the right figure shows)
2
）
join detergent from former water injection
nozzle, then start to fill water into solution
tank.
if use bucket, you could pour water from
If use water from the tap water faucet, you
could directly into the machine side of water
hold, but pay attention to the water level, so as
not to clean liquid overflow
！
Start work:
1
）
Add water into solution tank, assemble the
brush pad or pad driver with mat, then
you can start your work, and there are
two styles for your reference:
If the working place is too large, you can choose style 1.
(as the right figure shows)
注水口注水
In order to protect the environment, please try
to reduce the amount of detergent! please use
neutral low foam detergent! join defoaming
agent when use detergent, to eliminate foam in
recovery tank, to prevent foam overflow and
burn suction motor!
Adding water mouth
Lid of clear water tank
Water filling nozzle
Water filling pipe
