FS20 / FS213
8
3. Quick operation and pay attention to
How To Operate The Machine
1. To turn the power on, turn the key switch (7). The
power/battery indicator (I) will light up.
2. Check the battery capacity to see if it is full
– all indicators
are lit up when full.
3. To turn on the brush motor, vacuum motor and the solution
flow, press the switches (D,E).
4. Lay down the squeegee release level (9), press the suction
motor button(E), the squeegee will start to work; when you
finish your work, press the button(E), the suction motor will
be stopped, then lift the squeegee up.
5. Move the knob A into"
" position, the machine will move
forward automatically; while in "
" position, the machine
will reverse automatically.
6. Hold the plastic handle, lift the metal start level, the machine
starts to move, release the start level, the machine stops.
7. Turn the speed adjust knob to"
" side, you speed up the
machine, while to "
" side, the speed will slow down
Turn off the brush motor before the brush is lifting.
Pay attention to before operate
：
1
）
For the first time using machine, operator should be trained.
2
）
in the process of the replacement of the new, the original operator or supervisor to deal
with the new operator to carry out training to teach the operation and attention to matters,
to avoid unnecessary accidents.
3
）
understand, familiar with the place, determine the route of machine, to complete in
easiest and safest.
4
）
Check the battery capacity (the new machine or a longer period of time without the use
of the machine will be full of electricity before use).
5
）
choose brush or cleaning pad according floor situation
The purpose of cleaning is to remove the surface dirt on the premise of
protecting the ground, brush, pad selection is not appropriate may hurt
your ground, please pay attention!
