FS20 / FS213
10
液位传感器
If the working place is long and narrow, you can choose style 2.
(as the right figure shows)
2) The key point for high efficiency cleaning:
detach the dirty from floor surface and take the dirty
away from your working place.
3
）
In order to improve your work efficiency, pay
attention to control during operation, try to
clean surface press one by one, do not appear
leak, with least operation to complete
work(shown at right)
4) If the recovery tank is full, the suction motor
will be stopped automatically. At this time,
you need to empty the recovery tank and
re-add the water into solution tank.
5) Repeat like this, can you do it?
Pay attention to:
1
）
Never add any corrosive liquid(such as sulfate, hydrochloric and other high corrosive
detergent) into solution tank, or the machine will be damaged severely.
2
）
After charging, power lock should be closed and remove the key, temporary charge can
not replace full charge, such operations can severely shorten the service life of the battery.
The charger and the battery are matched to use, do not use the non configuration charger,
so as not to cause damage to the battery.
3
）
forbidden to open machine under charge state, it will cause accident or damage the charger
4
）
To check the liquid level sensor in the recovery tank.
5
）
If any foreign body is wrapped around the liquid
level sensor, please remove it in time to avoid
affecting the work of the sensor.
Cleaned floor
Cleaning floor
L
Liquid level sensor
