17
Using T
his Pr
oduct
Ins
talling T
his Pr
oduct
If mounted either in plywood paneling 0.20 in.
(5 mm) or less in thickness or in drywall:
1)
In plywood paneling, drill holes with a
diameter of 0.24 in. (6 mm); in drywall, drill
holes with a diameter of 0.20 in. (5 mm):
2)
Using a hammer, gently drive the plastic
anchors into the holes.
3)
Fasten the bracket securely to the anchors
using mounting screws. As you tighten the
screws, they are hard to turn at first, then
gradually get easier to turn, and then are
hard to turn again.
If mounted in concrete:
1)
Drill holes with a diameter of 0.24 in. (6 mm)
and a depth of approximately 1.30 in.
(33 mm).
2)
Using a hammer, gently drive the plastic
anchors into the holes.
3)
Fasten the bracket securely to the anchors
using mounting screws.
(4) Align the remote control unit with the
bracket and then push it down onto the
bracket.
Plastic Anchor
Plywood paneling : 0.24 in. (6 mm)-dia.
Drywall
: 0.20 in. (5 mm)-dia.
Bracket
Mounting Screw
Bracket
Mounting Screw
0.24 in.
(6 mm)-dia.
1.30 in.
(33 mm)
Plastic Anchor
Bracket
Remote
control unit
