Using T
his Pr
oduct
Ins
talling T
his Pr
oduct
26
Water is sprayed from the
rear cleansing nozzle.
Cleansing
Water is sprayed from the
front cleansing nozzle.
Bidet
Press the Cleansing button.
1
3
Press the STOP button to stop
the spraying.
* An automatic self-stop function is
included which stops both rear and front
cleansing automatically after 2 minutes.
• In places with low tap water pressure, the
nozzles may not spray water far enough if the
water pressure is set to LO. In such cases, try
setting the water pressure to HI.
• Fully cover the toilet seat while sitting in order
to prevent water from splashing outside the
toilet.
Press the [+] or [-] Spray Strength
button to adjust the shower strength.
2
There are six levels of spray strength. Adjust
the spray strength as desired.
* The indicator LED cycles through the spray
strength settings each time the button is
pressed.
* The indicator LED goes out after several
seconds.
You can decrease or increase the spray strength
beyond the default setting range. See page 51.
The indicator LED on the remote control goes out
after several seconds. When the [STOP] button is
pressed before using the shower, the LED lights,
indicating the current spray strength setting.
Reference
How to Use the Basic Functions
1
Press the Bidet button.
CAUTION
