background image

Using T

his Pr

oduct 

Ins

talling T

his Pr

oduct

28

Press the buttons simultaneously for 2 seconds.

Press the buttons simultaneously for 2 seconds.

• 

If you are using the drying function for a long 

period of time, set the Dryer mode to LO.

• 

For the following persons, be 

sure to set the Dryer mode to LO 

when they are using this product:

  Children, elderly persons, persons 

with illness, persons with limited mobility, persons 

with sensitive skin, persons who are taking 

medicines that cause drowsiness, persons who are 
intoxicated, or persons who are extremely fatigued.

*  If the drying function is being used for a long 

period of time with the Dryer mode on any setting 

other than LO, there is danger of causing burns.

Drying

The warm air temperature setting is 

available in 3 modes: "Hi" "Mid" and "Lo". 

Set it to the temperature you prefer.

*  The indicator LED cycles through the temperature 

settings each time the temperature button is pressed.

*  The indicator LED goes out after several seconds.

*  When drying is stopped, the setting is returned to the preset temperature. 

*  The deodorizer function stops temporarily 

while the drying function is being used.

*  Each time the button is pressed, the indicator changes 

from “High” to “Medium” to “Low,” then back to “High.”

Deodorizing

Deodorizing starts when a person 

sits on the toilet seat.

1

Deodorizing automatically stops 1 

minute after you stand up.

2

*  This product is equipped with a deodorizer cartridge 

which absorbs odors from the toilet. See page 33.

*  Deodorizing is stopped temporarily while the 

drying function is being used.

Stops after 1 minute

Warm air dries the user after front or rear cleansing.

Press the STOP button to stop the 

drying function.

3

2

Press the Dryer button again to change 
the temperature of the warm air

.

Press the Dryer button.

1

WARNING

•  To speed up the drying process after using one of the wash functions, lightly wipe with toilet paper to 

remove any drops of water, prior to pressing the Dryer button.

• 

This product is equipped with a "low drying temperature start" function which switches the drying 

temperature from the high temperature starting pattern to the low temperature starting pattern. See page 30

Reference

To disable the deodorizer

Press the STOP and Bidet buttons 

simultaneously for 2 seconds.

*  An automatic self-stop function is included that 

stops drying automatically after 4 minutes.

*  When the deodorizer feature is disabled, 

the power LED on the seat unit flashes 
momentarily. At this point, the deodorizer will 
no longer activate when a user is detected. 

*  The restore the deodorizer function, press 

the STOP and Bidet buttons simultaneously 

for 2 seconds.

*  If an unsuitable toilet seat cover is used, the seat sensor may be covered by the cloth, causing the 

deodorizer fan to run continuously.

COMPULSORY

Press the buttons simultaneously for 2 seconds.

Содержание AT100

















































Отзывы: