DX Engineering DXE-8040-30AOK, Руководство пользователя

Страница: 10 / 16

- 10 -
3. The black wire (23.5") has two different sized ring terminals. Take the smaller ring terminal end
and loosely weave the wire through the second hole of end insulator as shown in Figure 13 .
Figure 13
4. Assemble the last end insulator as shown in
Figure 14 using the Flex-Weave (233") wire, the
black wire (#10 ring terminal end) and the stainless steel hardware Note the hex head bolt has a
recessed area the head fits slightly in during assembly. Note, when putting the stainless steel
spring on, use the Nyloc hex nut only tightened as shown in
Figure 14 . This allows the spring to
move, but not come off.
Figure 14