- 3 -
Keep your distance! Remember the 10-foot rule: When carrying and using ladders and other long
tools, keep them at least 10 feet away from all overhead lines - including any lines from the power
pole to your home.
Tools Required
Two 7/16” wrenches, (one of them should be open-end)
5/16”, 3/8”, 7/16”, and 1/2” wrenches or
5/16”, 3/8”, 7/16”, and 1/2” sockets and drive
Medium size flat blade screwdriver or 5/16” nut driver for the element clamps
Tape measure
Felt-tip marker
DXE-40VE-2 Parts List
Description
Quantity
Description
Quantity
Tilt Base Assembly
(patented)
Antenna Elements and Element Clamps
Tilt Base, 3/16" Laser Cut Stainless Steel
1
2.00 x 0.125" x 36" Tube (Drilled)
1
DXE-SSVC-2P V-Bolt Saddle Clamp
2
2.125" x 0.058" x 36" Tube (Split both ends)
1
Tilt Base, Mast Mount EXTREN
®
Channel
1
2.000" x 0.058" x 36" Tube (Split one end)
1
Tilt Base Plate, Aluminum
1
1.875" x 0.058" x 36" Tube (Split one end)
1
1/4-20 x 2" Hex Head Bolt, full thread
4
1.750" x 0.058" x 36" Tube (Split one end)
1
1/4" Flat Washer
4
1.625" x 0.058" x 36" Tube (Split one end)
1
1/4" Split Washer
4
1.500" x 0.058" x 36" Tube (Split one end)
1
1/4" Dia. X 1/4" x 1/2" OD Aluminum Spacer
4
1.375" x 0.058" x 36" Tube (Split one end)
1
1/4-20 Hex Nut
4
1.250" x 0.058" x 36" Tube (Split one end)
1
1/4" Fender Washer, 1" OD
4
1.125" x 0.058" x 36" Tube (Split one end)
1
1/4-20 Flanged Nut
2
DXE-ECL-12SS - Element Clamp
1
1/4-20 Nyloc Nut
4
DXE-ECL-16SS - Element Clamp
2
3/8" U-Bolt Kits w/Alum. Saddles & Hardware
2
DXE-ECL-20SS - Element Clamp
2
DXE-ECL-24SS - Element Clamp
2
DXE-ECL-28SS - Element Clamp
2
Black Top Vinyl Cap - 1-
1/8” ID
1
Feedpoint Connection Hardware
Top Hat Assembly
1/4-20 x 1" Hex Head Bolt, full thread
1
DXE-MPH-1 Multi-purpose Hub
(patented)
1
1/4" External Tooth Washer
2
40VA-2 Top Hat Support Bracket
3
1/4" Flat Washer
2
DXE End Insulator
(patented)
3
1/4-20 Hex nut
2
1/4-20 x 1-
1/4” Hex Head Bolt, full thread
3
1/4-
20 x 1” Hex Head Bolt, full thread
3
1/4-20 Square Nut
3
1/4-20 Hex Nut
6
1/4” Split Lock Washer
6
1/4” Flat Washer
6
1/4” External Tooth Washer
3
#10 Aluminum Spacer
3
#10
x 3/4” Hex Head Bolt
6
#10 Thin Flat Washer
6
#10 External Tooth Washer
6
#10-24 Nyloc Hex Nut
6
Top Hat Wire Assembly w/ #10 Ring Term
3
Manual Updates
Every effort is made to supply the latest manual revision with each product. Occasionally a manual
will be updated between the time your DX Engineering product is shipped and when you receive it.
Please check the DX Engineering web site (
www.dxengineering.com
) for the latest revision manual.
