background image

                                                                                                                         

 

Page 1 

Broadlink Research    9000 Crow Canyon   Road 

Suite S-200    Danville, CA    94506 

(408)391-9019 

(650)917-1038 Fax 

 

Broadlink Research, Inc. 

 

Personal Smart Antenna PSA-1900 
 

 

Personal Smart Antenna 

Installation Guide 

Changes or modifications not expressly approved by the party responsible for compliance could void the 
user's authority to operate the equipment.

 

 

This Class [B] digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

 

 

Overview 

 
The Personal Smart Antenna (PSA) is a totally wireless device that will automatically 
adjust to the environment it is being installed.  The device will provide the following 
feedback to help with an optimal installation. 

Installation 

 
Remove the PSA from the box, connect the power supply to the PSA, and then plug in 
the power supply to a power outlet.  The PSA will display both the red and green light for 
about 5 seconds as the device learns the environment. 
 

NOTE: This equipment has been tested and found to comply with the limits for a Class 
B digital device , pursuant to Part 15 of the FCC Rules.  These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications.  However, there is no guarantee that interference will not 
occur in a particular installation.  If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try and correct the interference by one or more of the 
following measures: 
— Reorient or locate the receiving antenna. 
— Increase the separation between the equipment and receiver. 
— Connect the equipment into an outlet on a circuit different from that to 
     which the receiver is connected. 

—  Consult the dealer or an experienced radio/TV technician for help. 
 

Отзывы: