DVZ Biomaster PLUS Series, Финальная документация

Страница: 8 / 145

SPECIFICATION
BIOLOGICAL SEWAGE TREATMENT PLANT
DVZ-SKA-40 ”BIOMASTER“ – PLUS page: 2/5
DVZ-SERVICES GmbH
Geschäftsführer:
Dipl.Ing.Jens van Züren
Boschstr. 6, D-28857 Syke
Tel.: ++49 4242-1693 8-0
Fax ++49 4242-1693 8-99 Bankverbindung/ banque account :
Volksbank Syke e.G.
(BLZ 291 676 24) Konto-Nr. 624/815 7753 200
DG Bank, Hamburg/GENO DE F1 SHR
SWIFT-Code: GENO DE FF 200
UST-ID-No/ EEC VAT No : DE 812611118
Gerichtsstand und Erfüllungsort Syke
Amtgericht Walsrode HRB 111011
Die gelieferte Ware bleibt bis zur
vollständigen Bezahlung Eigentum des
Lieferanten
TECHNICAL SPECIFICATION
The system will be delivered as a package unit. All components delivered by
DVZ - SERVICES are prepared with its internal cables and pipes.
The system is consisting of:
1.
Biological Sewage Treatment Plant, Type: DVZ- SKA-40 PLUS,
Three chamber biological STP with membrane unit (BMSU).
Prefabricated and tested skit mounted
unit, ready for operation. All wet contacted
parts made from stainless steel (316) or non corrosion material,
Rested on a mild steel base frame, welded construction with primer coating.
consisting of:
1st inlet chamber for raw sewage and pre-treatment, sludge removal system,
2 nd chamber with genuine DVZ submerged packed bed bio-reactor and special
ring- aeration and recirculation system,
3 rd chamber, compartment for control transfer- and BMSU feed pump,
Bio-mass separation unit with automatically conditioning- and fleshing system for
clean water (permeate) production.
connection flanges:
inlet black water:
DN 50/DN100
inlet grey water: DN 150
aeration: DN 80
discharge: DN 50
flushing: DN 50
2. 2 Discharge pump (P6) with cutting device, with el. motor 1,7 kW, 440 V – 60 cs
pump capacity: 15 m³/h against 18 m WC (one in action, one in stand-by mode).
With pressure gauge
3.
2 Rotary fan blower (G1) with el. motor 440 V – 60 cs, 0,7 kW, with pressure
gauge (one in action, one in stand-by mode).
4.
1 Electric switch box with all necessary parts for automatically operation by PLC-
Control- System, E – power: 3x 440 V, 60 Hz., with transformer 3 x 440 V primary
and secondary 24V DC/22OV AC, level and pressure transmitter relays, motor
starter and protection relay, PLC operation panel for start/stop all drives in
automatic/manual operation, all necessary lamps, for control the process, all
mounted in a splash proof steel box, IP 54 protected.
The switch box
with door stopper is ready mounted, tested and wired together