DVZ Biomaster PLUS Series, Финальная документация

Страница: 124 / 145

COMMISSIONING
DVZ-SKA-„BIOMASTER“-PLUS
Abschnitt :
QMF 47
DVZ-SERVICES GmbH Boschstrasse 9 D-28857 Syke
Tel. ++49 4242 16 93 8-0 Fax ++49 4242 16 93 8-99 info@dvz-services.de
Rev.- Nr.: 00 page: 4/6 QMF47
NOTE: If the STP has stand-by pumps or blowers (P5.1/P5.2, P6.1/P6.2 and/or G1.1/G1.2) one of this
pumps need to be pre-selected by using the F button on the PLC. Please refer also to the
instruction manual “control panel”.
REMARK:
The STP has to be desludged minimum once a month. If the water from the side-cleaning was
led by valve H15 (if installed) to the STP and not back to buffer tank, the STP has to be
desludged once a week. The desludging periode depends on the amount of blackwater also.
MEMBRANE GENERAL OPERATION TEST
BMSU Permeate Flux Rate Operation Pressure
BMSU
Temperature
No.
Membrane
Type
Max.Flux
(l/h)
Nom.
Flux
(l/h)
Measured
Flux (l/h)
Nom.
Pressure (bar)
Measured
Pressure (bar)
Measured
Temperature
(°C)
BMSU 1
Type (1) 250
0,6-4
Type (2) 450
Type (3) 450
Type (4) 700
BMSU 2
if installed
Type (1) 250
0,6-4
Type (2) 450
Type (3) 450
Type (4) 700
BMSU 3
if installed
Type (1) 250
0,6-4
Type (2) 450
Type (3) 450
Type (4) 700
BMSU 4
if installed
Type (1) 250
0,6-4
Type (2) 450
Type (3) 450
Type (4) 700
BMSU 5
if installed
Type (1) 250
0,6-4
Type (2) 450
Type (3) 450
Type (4) 700
BMSU 6
if installed
Type (1) 250
0,6-4
Type (2) 450
Type (3) 450
Type (4) 700