DVZ Biomaster PLUS Series, Финальная документация

Страница: 121 / 145

COMMISSIONING
DVZ-SKA-„BIOMASTER“-PLUS
Abschnitt :
QMF 47
DVZ-SERVICES GmbH Boschstrasse 9 D-28857 Syke
Tel. ++49 4242 16 93 8-0 Fax ++49 4242 16 93 8-99 info@dvz-services.de
Rev.- Nr.: 00 page: 1/6 QMF47
serial-no.: type: date:
customer: place: vessel/NB:
NOTE: Please, observe the informations and safety instructions in the operating instructions, to ensure
that the unit functions satisfactorily and remains serviceable for a long period.
BEFORE PUTTING INTO OPERATION FOR THE FIRST TIME O.K. REMARKS
1. Check the installation of the Sewage Treatment Plant (STP)
according to project drawings (pipings, foundation, please
ground-surface). Look also for obvious damages caused by
transport or installation.
2. The minimal dimension of air vent is to be installed as
the same diameter as it is present on the STP.
3. Check all pipe connections. They needs to be tighten well to
avoid leakages.
4. Chech the power supply on the control panel. It has to
correspond to the project-specifications and to the type-plate of
the STP.
5. Check the turning-directions of the electric motors on the STP.
If the electric motors should have the wrong turning-direction,
please change the related phases of the power supply
connection. There are no changes necessary on the connection
of the electric motors.
6. Check the correct electrical connections of loose supplied
equipment (transfer pumps etc.), potential free output contact
for external alarms etc. and the level-controls from holding and
buffer tank where it is installed. (Please refer to the projet
relaed wiring diagram)
7. Check the compressed-air-supply, and adjust it with the
pressure regulating valve (PRV) to 4-6 bar.
8. Check all impellers of the delivered pumps and blowers for
easy-of-movement.