-9-
4 .2 Optional Connections
In addition to the video signal, the DVI-7365 supports extension of other signal
types over the fiber link. These pass-through connections can be used to
provide communications with other devices in the system. These connections
include 10/100Base-T Ethernet, bidirectional IR, and RS-232.
LAN Ethernet RJ45 port
Connect to the LAN port of a peripheral device to provide a 10/100Base-T
connection via the fiber link.
IR Connections
Each extender set supports bidirectional IR communications. The Transmitter
and Receiver Units each have two IR ports on the rear panel, labeled “IR IN”
and “IR OUT”. To set up the IR data pathway, connect an IR receiver device
(1x is included) to an “IR IN” port on one unit. Next, connect an IR transmitter
to the “IR OUT” port of the other unit.
Any IR communications directed to the IR receiver module on one end of the
extender set will be sent out of the IR transmitter module at the other end.
For bidirectional communication, an additional IR TX and RX (purchased
separately) may be connected. This allows IR data to be sent upstream,
downstream, or both.
Receiver
Transmitter
IR RX
IR TX
IR TX
IR RX
12 VDC
10/100M
10/100M
ETHERNET 2
ETHERNET 1
Tx Rx
IR OUT
IR IN
HDMI OUT
OPTICAL IN
12 VDC
10/100M
10/100M
ETHERNET 2
ETHERNET 1
Tx Rx
IR OUT
IR IN
HDMI OUT
OPTICAL IN
1 2
ON
1 2
ON
12 VDC
10/100M
10/100M
ETHERNET 2
ETHERNET 1
Tx Rx
IR OUT
IR IN
HDMI IN
EDID MODE
OPTICAL OUT
12 VDC
10/100M
10/100M
ETHERNET 2
ETHERNET 1
Tx Rx
IR OUT
IR IN
HDMI IN
EDID MODE
OPTICAL OUT
