background image

-3-

2 .0 SPECIFICATIONS

Performance

Standards Compliance

HDMI 4K /60p,  DVI v1.0,  HDCP v2.2

Maximum Pixel Clock Frequency

600 MHz

Maximum Video Bit Rate

6 Gbps. / 18 Gbps. (Aggregate)

Total System Jitter (I/O)

0.6 UI maximum

Inter-Channel Skew

2 nanoseconds maximum

Ethernet

10/100 BaseT

Supported Color Depth

Up to 12-bit per pixel

Supported Resolutions

Up to 4K:  4096 x 2160 /60Hz (4:4:4)

Digital Audio Support

Embedded HDMI digital audio up to 8-channel (7.1) LPCM, 48 kHz, 
24-bit audio capability

Connections

HDMI Input / HDMI Output

1 ea. 19-pin Female HDMI connector

Optical

1 ea.  LC fiber optic connector

Ethernet

2 ea.  RJ-45 female connector

RS-232

1 ea.  3-pin Phoenix connector

IR Input / IR Output

IR IN:  1 ea.  3.5mm stereo mini-jack 
IR OUT:  1 ea.  3.5mm mini-jack

Power

1 ea. Screw-Locking 2.1 / 5.5 mm female connector

Controls

TX Unit

Front Panel:  EDID Learn button, LEDs for EDID, Power, Optical Link, 
HPD and Ethernet 
Back Panel:   EDID Mode selection via 2x DIP switches

RX Unit

LEDs for Power, Optical Link, HPD and Ethernet

Optical

Optical Technology

CWDM (Course Wavelength Division Multiplexing) using 6 optical 
wavelengths

Laser Diodes 

1270 / 1290 / 1310 / 1330nm 10Gbps CWDM DFB Lasers 
1490nm / 1550nm 2.5Gb / s CWDM DFB Lasers

Photo Diodes

1100 – 1620nm PIN Photo Detectors 

WDM Filter

Integrated 1270nm / 1290nm / 1310nm / 1330nm / 1490nm / 
1550nm filter

Optical Wavelengths /  
Actual Data Rates

TMDS Signals:  1270nm / 1290nm / 1310nm / 1330nm  = 6.0 Gbps. 
DDC, IR, RS-232, Ethernet Signals:  1490nm / 1550nm  = 1.25 Gbps.

Optical Link Power Budget

8.0 dB (minimum)

Cable

Maximum Cable Length 
(typical)

9/125μ   Single-Mode Fiber: 

> 1.86 miles  ( ~ 3,000 meters) 

50/125μ OM3 Multi-Mode Fiber:  > 1,000 ft.     ( ~    300 meters)

DVIGear Fiber Cable

OFNP, Plenum rated – additional data and custom lengths available 
on request

Cable Jacket

OFNP, Plenum rated, Black PVC Jacket

Cable Outside Diameter

0.2"  (4.4 mm)

Содержание DVI-7365



















Отзывы: