background image

-1-

  WARNING – Product Safety

1.  Do not dismantle the product housing or modify the printed circuit board 

module as this may result in electrical shock or burn.

2.  Do not attempt to service this product yourself as opening or removing the 

product housing may expose you to dangerous voltages or other hazards. 
Refer all servicing to qualified service personnel.

3.  Keep this product away from liquids.  Spills into the product housing may 

result in fire, electrical shock, or equipment damage.  If liquid spills into the 
housing, unplug the product immediately.  Have the product checked by a 
qualified service engineer before using it again.

4.  Place the product in an even and stable location.  If the product falls or is 

dropped, it may cause an injury and/or malfunction.

5.  Avoid exposing the product to extreme temperatures or to high humidity 

levels as this may result in damage to the product.

6.  Only use the supplied External AC Power Adapter.  The use of other power 

adapters may cause this product to fail or may cause a fire.

7.  Do not twist or exert excessive force on the ends of the connected cables 

as this can cause them to malfunction.  Take precaution to ensure that all 
connected cables are not forced to bend beyond their minimum bend radius.

8.  WARNING: Invisible Laser Radiation.  Do not view directly with optical 

instruments or look into beam.

Product Liability

Every effort has been made to ensure that this product is free of defects. 
DVIGear cannot be held liable for the use of this product or for any direct or 
indirect consequential damages arising from its use.  It is the responsibility of 
the users of this product to check that it is suitable for their requirements and 
that it is installed correctly.

DVIGear, Inc. is the owner of numerous trademarks, both registered and 
unregistered, including without limitation, the following marks:  DVIGEAR

®

DISPLAYNET

®

, DISPLAYNET SERVER

®

, DISPLAYNET MANAGER

®

, N/AV 

Design

®

, HYPERLIGHT

® 

and, WILDCAT

®

.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI 
Logo are trademarks or registered trademarks of HDMI Licensing Administrator, 
Inc.  All other third-party trademarks used herein are the properties of their 
respective owners.

© 2022 DVIGear, Inc.  All rights are reserved.  No part of this manual may be 
reproduced or transmitted by any form or means, electronic or mechanical, 
including photocopying, recording or by any information storage or retrieval 
system, without the prior written consent of DVIGear.

Содержание DVI-7365



















Отзывы: