-6-
Transmitter Unit (DVI-7365-TX) – Rear View
Receiver Unit (DVI-7365-RX) – Rear View
1 Optical Output Connector (TX):
Connect a Single-Mode or Multi-Mode
Fiber Optic Cable. The DVI-7365-TX uses LC optical connectors.
1 Optical Input Connector (RX):
Connect a Single-Mode or Multi-Mode
Fiber Optic Cable. The DVI-7365-RX uses LC optical connectors.
2 EDID DIP Switch (TX):
See Section 5.0 for details on settings.
3 HDMI Input (TX):
Connect to an HDMI source.
3 HDMI Output (RX):
Connect to an HDMI display.
4 Infrared (IR) IN:
Connect the included IR receiver to accept IR signals
for transmission over the fiber link. See Section 4.2 for further details.
4 Infrared (IR) OUT:
Connect the included IR transmitter to accept IR
signals over the fiber link and output them to a peripheral device. See
Section 4.2 for further details.
5 RS-232:
3-pin female Phoenix Connector for serial data pass-through.
6 LAN Ethernet Ports:
Extends 10/100Base-T network connectivity over
the fiber link.
7 +12 VDC Power Input:
Locking female connector for AC Power Adapter.
3
1
2
5
7
6
3
1
5
7
6
3
