ITVC Series – Intelligent Total Valve Controller IOM-ITVC-Basic-05
DVG AUTOMATION S.p.A.
Legal & Operative HQ: 29016 Cortemaggiore (Piacenza) Italy, Via G. Rossetti n° 2
Tel. (+39) 0523 255811; Fax (+39) 0523 255890;
Fully Paid In Capital: Euro 1.000.000,00=
ISO
9001, ISO 14001, OHSAS 18001
CERTIFIED
REA 167410 - VAT 01494460338
COMPANY SUBJECT TO MANAGEMENT AND COORDINATION BY G.I.V.A. S.P.A. WITH HEADQUARTERS IN RHO (MILAN), RECORDED UNDER NUMBER 02917180172 IN
MILAN'S REGISTER OF COMPANIES
www.dvgautomation.it
SHEET 11 DI 64
WARNING!
Internal earth connection
Earth conductor of cables must be electrically connected to ground. An earthing connection is provided
internally to the equipment. Connection must be secure so that the electrical conductors cannot be readily
loosened or twisted and contact pressure on electrical connection can be maintained in all conditions. Care
must be taken to protect the connection against corrosion.
WARNING!
Paint procedures
No.1 (standard): 70 ÷ 100µm TGIC-free polyester powder coating
No.2 (optional): 840 ÷ 1050µm thermoplastic powder coating
WARNING!
REPAIR of equipment must be carried out according to IEC 60079-19 and only under control and
authorization of DVG AUTOMATION S.p.A. or an authorized third-party.
Nothing concerning the protection means can be modified.
Violation of the above mentioned rules will cause loss of every feature of conformity to the certificate of the
motor equipment.
WARNING!
Check periodically that maximum dust thickness on enclosure does never exceeds 5mm.
WARNING!
Perform electrical connections as per statutory requirements. In particular, check tightness and integrity of
cable glands and/or plugs. If opening of any cover is necessary, before reassembling, check integrity of
antideflagration joint/s and gasket/s, clean thoroughly and apply a small quantity of silicon grease on mating
surfaces and gasket. Tighten hex socket head screws (M6 – tightening torque 8,0 Nm).
Содержание IOM-ITVC-Basic-05
Страница 2: ......
