Durr Dental VistaScan Mini View, Инструкция по установке и эксплуатации

Страница: 36 / 64

34
2142100002L02 1908V007
Usage
Preparing for scanning
CAUTION
Light erases the image data on the
image plate
i
Never handle exposed image plates
without the light protection cover.
Wear protective gloves.
i
Remove the image plate with the light protec-
tion cover from the patient's mouth.
WARNING
Contamination of the unit
i
Clean and disinfect the light protec-
tion cover before removing the image
plate.
i
In the event of heavy soiling, e.g. from blood,
dry clean the light protection cover and pro-
tective gloves, e.g. wipe with a clean cellulose
cloth.
i
Disinfect the light protection cover and protec-
tive gloves with a disinfection wipe
(e.g. FD 350).
Alternatively, a spray disinfectant (e.g. FD 322,
FD 333) can be used on a soft, lint-free cloth.
i
Place the light protection cover with the image
plate on the disinfection wipe.
i
Allow the light protection cover to fully dry.
i
Pull off the protective gloves, disinfect and
clean the hands.
"12.2 Light protection cover").
i
Allow the light protection cover to fully dry.
i
In the case of image plates Plus size 4, place
the bite protector around the light protection
cover with image plate if necessary.
Taking the X-ray image
NOTICE
Damage to the image plate caused
by a sharp-edged holding system
i
Only use holding systems that will not
damage the light protection cover or
the image plates in any way.
i
Do not use holding systems with
sharp edges.
Wear protective gloves.
i
Place the image plate in the light protection
cover into the patient's mouth.
When doing this, make sure that the active
side of the image plate points towards the
X-ray tube.
i
Set the exposure time and setting values on
the X-ray unit (see "8.2 X-ray unit settings").
i
Record an X-ray image.
The image data must be scanned within 30
minutes.
EN