Durr Dental VistaScan Mini View, Инструкция по установке и эксплуатации

Страница: 38 / 64

36
2142100002L02 1908V007
Usage
11.3 Scanning image data via the
touch screen on the unit
Starting the image plate scanner
When scanning the image data via the touch
screen, there is no need for a PC connection.
The image data is stored locally on the memory
card. In order to transfer the image data to the
imaging software, the unit must be connected
to a computer.
Scanning via the touch screen can be done in
two ways:
Scanning :
Before scanning the image data, the
patient data and exposure settings of
the image are entered and then saved
with the image data.
If no patient data and exposure set-
tings of the image are entered then the
image is saved to a folder with date
and time.
Rapid scanning :
The image data is saved to a folder
with the date and time and no addi-
tional information.
Use Help on the touch screen for further
information on operating the unit via the
touch screen.
Requirements:
– Memory card (SDHC, max. 32 GB) in the slot
on the unit.
i
Press to switch on the unit.
Start scanning:
i
On the touch screen tap on Scan .
i
Enter the patient data.
i
Select the image settings and scanning mode.
i
Slide the image plate out of its light protection
cover downwards into the device until the im-
age plate is automatically drawn in.
The light protection cover is held in place by
the fixing mechanism and is not transported
into the unit.
Scanning progress is displayed on the touch
screen. The image data is automatically
transmitted to the imaging software.
After it has been scanned, the image plate is
erased and drops into the collection tray.
i
Save the X-ray image.
i
Remove the empty light protection cover.
i
Remove the image plate and prepare it for
taking a new X-ray.
EN