DURKOPP ADLER 911-211-10 Скачать руководство пользователя страница 80

Страница: 80 / 134

Programming

Operating Instructions 911-211-10 - 00.0 - 10/2020

5.13 Testing the functions of the machine

You can use the

Extras

Service

Multi test

menu item

to check the inputs and outputs, test the sewing motor and set the stroke
position.

Fig. 52: Testing the functions of the machine

Information

The functions

Transport clamp

and

Thread burner

are only intended for use by Dürkopp Adler Service personnel.

5.13.1 Test inputs and outputs

Important

The instructions only provide an overview of the test possibilities.

The tests may only be performed by qualified specialists that have
received training from Dürkopp Adler.

To test inputs and outputs:

In the menu item

Extras

Service

Multi test

press the

Test inputs

outputs

option.



The

IO Test

Page

window is displayed.

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Do NOT reach into the machine during function
testing of inputs and outputs.

Содержание 911-211-10







































































































































Результаты поиска

Содержание 911-211-10

Отзывы:

Похожие инструкции для 911-211-10

Бренды по названию

Популярные бренды

DURKOPP ADLER 911-211-10, Руководство по эксплуатации

Результаты поиска

Содержание 911-211-10

Отзывы:

Похожие инструкции для 911-211-10

Бренды по названию

Популярные бренды