DURKOPP ADLER 911-211-10 Скачать руководство пользователя страница 8

Страница: 8 / 134

About these instructions

Operating Instructions 911-211-10 - 00.0 - 10/2020

Steps to be performed when operating the machine (sewing and
equipping)

Steps to be performed for service, maintenance, and installation

Steps to be performed via the software control panel

The individual steps are numbered:

First step

Second step

The steps must always be followed in the specified order.

Lists are marked by bullet points.

Result of performing an operation

Change to the machine or on the display/control panel.

Important

Special attention must be paid to this point when performing a step.

Information

Additional information, e.g. on alternative operating options.

Order

Specifies the work to be performed before or after an adjustment.

References



Reference to another section in these instructions.

Safety

Important warnings for the user of the machine are specifically marked.
Since safety is of particular importance, hazard symbols, levels of
danger and their signal words are described separately in the chapter

Safety

(



p. 9

Location

information

If no other clear location information is used in a figure, indications of

right

left

are always from the user's point of view.

…

•



Содержание 911-211-10







































































































































Результаты поиска

Содержание 911-211-10

Отзывы:

DURKOPP ADLER 911-211-10, Руководство по эксплуатации, Страница: 8 / 134

Результаты поиска

Содержание 911-211-10

Отзывы: