DURKOPP ADLER 911-211-10 Скачать руководство пользователя страница 19

Страница: 19 / 134

Operation

Operating Instructions 911-211-10 - 00.0 - 10/2020

4.3

Changing the needle

Fig. 4: Changing the needle

To change the needle:

Push the hand crank (1) down and rotate it to the left until the needle
bar (6) reaches the highest position.

Loosen threaded pin (4) (threaded pins (4) and (5) for long needles).

Pull the needle downwards out of the needle bar (6).

WARNING

Risk of injury from sharp parts!

Puncture possible.

Switch off the machine before you change the
needle.

NOTICE

Property damage may occur!

Risk of damage to machine and thread if hook clearance is incorrect.

When switching to a different needle thickness, adjust the distance
between hook and needle.

(1)

- Hand crank

(2)

- Cylinder pin

(3)

- Groove

(4)

- Threaded pin

(5)

- Threaded pin

(6)

- Needle bar

①

②

③

④

⑤

⑥

Содержание 911-211-10







































































































































Результаты поиска

Содержание 911-211-10

Отзывы:

DURKOPP ADLER 911-211-10, Руководство по эксплуатации, Страница: 19 / 134

Результаты поиска

Содержание 911-211-10

Отзывы: