DuraMAX
Duo
DuraMAX
RC
DuraMAX
Duo Jr.
9
the machine reverses an internal clutch in the wheel tube will cause the cleaner to turn slightly. This sequence will repeat
three times. On the fourth time the machine will climb the wall for ten seconds This sequence will repeat 30 times then the
machine will cross the pool and travel in the opposite direction.
DURAMAX DUO/DUO Jr/RC
This machine has a
delayed start
feature where the machine can start cleaning the pool an hour after
the Main Power Supply is turned on. This is done by switching the
power supply on (fig 1) and pressing the delay button on the remote
control (No.4). The UP/DOWN button allows the machine to reverse
itself both on the wall and floor. If for any reason the machine is
stuck on the pool floor for more than 6 minutes it will reverse (the Duramax RC has
2.5 minutes before reversing.) If the machine does not climb a wall within 6
minutes, it will reverse in the other direction. If the machine climbs out of the water,
it reverses itself every 25 seconds. The machine can be programed for
wall and
floor or floor only
cleaning. The default mode is set to clean the floor only. To change the
mode to clean the floor and wall, press the forward/reverse button on the remote control
once then turn the Main Power Supply switch on and the floor only mode will be engaged.
After the Power Supply switch is turned on the machine will first search for the wall. After it
finds the wall, the machine climbs the wall and remains on the wall for 2 seconds or 45
seconds ("
pool floor only"
and
"pool floor and wall"
mode respectively) after which it reverses itself
to head towards the pool floor. The machine will move away from the wall for about 2 seconds
turn, reverse and will search for the opposite wall. The machine will climb the wall and remains on
the wall for 2 seconds or 45 seconds ("
pool floor only
" and "
pool floor and wall
" mode
respectively) after which it reverses itself towards the pool floor. After this the program will
repeat itself.
Between 1 to 4 minutes the machine will turn on the pool floor. The machine will
perform a 90 degree turn and alternate between right and left turns
SIX BUTTON REMOTE
Up/Down
– Press once to change the current direction (Forwards/Backwards) of your cleaner.
Left
– Press and hold to turn the cleaner to the Left. Release the button when the unit is moving in
the desired direction.
Right
– Press and hold to turn to the Right. Release the button when the unit is moving in the
desired direction.
Delay
– Press once to delay the cleaning cycle of your cleaner by 1 hour. This feature allows the
cleaner to start working after the debris has settled to the bottom of the pool. Pressing the button again
will cancel the 1 hour delay and your cleaner will start working immediately.
Climb
– Press once to switch between the floor only and floor-and-wall mode.
Speed
– Press once to switch between Standard cleaning speed and Detailed cleaning speed (slower).
DuraMAX
Trio
OPERATING INSTRUCTIONS
Fig. 1
This machine has a one hour
delayed start
feature. The cleaner can start cleaning the pool an hour after
the Main Power Supply is turned on. This is done by switching the power supply on (fig 1) and pressing
the delay button on the remote control (Fig 4). The DURAMAX TRIO is a floor cleaning machine only. The UP/DOWN button
allows the machine to reverse itself on the pool floor. If the machine is hung-up on the pool floor for more than 5 minutes or if
the machine does not reverse within 8 minutes, it will reverse in the other direction. If the machine leaves the water, it will
reverse itself every 25 seconds until it locates water. If water is not located it will shut itself off. After the Power Supply switch
is turned on the machine will first search for the wall. After it finds the wall, the machine climbs the wall and remains on the
wall for 2 seconds turn, reverse and head towards the pool floor. The machine will move away from the wall for about 2
seconds, turn, and will search for the opposite wall. It will climb the wall and remains on the wall for 2 seconds after which it
will reverse itself towards the pool floor. After this, the program will repeat itself.
Between 1 to 4 minutes the machine will
turn on the pool floor. The machine will perform a 90 degree turn alternately between the right and the left.
delay
climb
speed
direction
