Durafly Curtiss P-40N, Инструкция по эксплуатации

Страница: 8 / 40

2.6x6mm
4. Insert that carbon tail spar into one half of the horizontal tail and slide into the opening at the rear of
the fuselage ensuring the plastic screw tabs key fully into the fuselage sides. Repeat with the second
half and once aligned, screw firmly in place with the 3x8mm screws as shown. A little glue may be
applied at this stage for added security if desired.
5. Into the hole of the elevator joint, screw the single 2.6x6mm screw as shown to ensure the elevator
halves remain connected.
3x8mm
5