Durafly Curtiss P-40N, Инструкция по эксплуатации

Страница: 11 / 40

2x20mm
9. Using a small amount of the glue supplied, glue the longer aerial into the slot behind the canopy, the
short aerial into the slot of the battery hatch and the pitot tube onto the leading edge of the left wing
panel as illustrated below.
10. Position the radiator cowl into place on the bottom leading edge of the wing. Using the 2x20mm
screws supplied screw directly into the foam under the screw holes and into the internal plywood
inserts. It is recommended not to over tighten these screws so as to make wing removal easier
when required.
8