Version
1.0
(2016)
Page
4
The default setting for temperature is ºF.To change the setting from ºFto ºC (or ºC to ºF), first press and hold the “
＋
”and
“
－
” buttons on the transmitter simultaneously(Fig. 7).The highest settemperature is 99º Fahrenheit = 32º Celsius.
Explanatory notes for TIMER, THERMO, Thermostat, & Modes:
*1:
TIMER mode is NOT available / included in model
TR1002-TH
.
*2: THERMO mode & Thermostatare NOT available / included in model
TR1002-T
*3: Mode sticker, located under the flip cover of transmitter, varies with different models.
REMOTERECEIVER BOX
The remote receiver box requiresfourAA-size 1.5V batteries (Fig. 8). When LOW battery icon appears on the screen, please
replace batteries.
The remote receiver box equips the microprocessor that receives thesignals / commands from the transmitter in order
tocontrol systemoperations / functions. Itmakes sounds of quick BEEP X 2 (
♫
,
♫
) when it receives an ON command,
andmakes sounds of continuous BEEP for one second (
♫
~~)when it receives an OFF command manually (or when Timer
ends automatically).But no beep when cycling ON/OFFautomatically inTHERMO
*2
mode.
The remote receiver box has a 3-position slide switch (ON/REMOTE/OFF) and a LEARN button on the front panel (Fig. 8).
Fig. 8
Fig. 9
ON mode:
Slide the switch to the ON position (toward the LEARN button), the system will remain ON all the time. Remote
transmitter is disabled.
REMOTE mode:
Slide the switch to the REMOTE position (middle), the system will ONLY operate with receiving commands
from the remote transmitter.
OFF mode:
Slide the switch to the OFF position, the system will remain OFF all the time. Remote transmitter and Receiver
box are both disabled.
★
NOTE: The OFF mode is strongly recommended if house is unattended for a long time. For safety, placing the slide switch
in the OFF position also functions as a safety “LOCK-OUT” by both turning the system off and disable the remote receiver.
WARNING& REMINDER
ThissystemMUST be installed exactly as complied with these instructions.Read all instructions before installation,
