Version
1.0
(2016)
Page
7
betweenreceiver wire terminal and the TH (thermostat) terminal on the ELECTRONIC MODULE.
Fig. 15
LEARNINGTRANSMITTERTORECEIVER
Each transmitter has a unique RF code. To have the receiver box to accept the transmitter’s signal(code), be sure the slide
switch button on the receiver is in the REMOTE mode.
Find the LEARN button on the front face of the receiver (Fig. 16) Use a small screw- drivergently press the black LEARN
button insidethe hole. Then the receiver box will
sounds of quick BEEP X 2 (
♫
,
♫
)
. And press theMODE button on
transmitter . The receiver box willbeeps indicating that the transmitter’s code has been captured by the receiver.
If you fail the LEARNING of matching the security code, please wait 2 minutes before another try.The interval allows the
microprocessor in the receiver box toreset itself and available for accepting new code. Please try more times.
Any questions, please email us.
Fig. 16
SYSTEMTESTS & CHECK LIST
