DURA-BILT Deluxe Three -Season Sunroom, Инструкция по сборке и установке

Страница: 16 / 20

5. Attach the Deluxe Front Header to the Panel Frames in the front wall with #12 X 3/4” self-drilling screws
inside and outside where Panel Frame Extrusions overlap. See drawing below.
Top view of Panel Frames looking through Deluxe Front Header
Note: If you have an existing roof you can lower it and secure it at this time. If you have a new roof
install the roof panels now according to instructions provided.
Gable Ends
The Gable End Channel is provided in two parts to allow for easier installation of the Gable End when the
Roof Panels have been previously installed.
1. Cut the Gable End Channel to fi t from the back of the Deluxe Front Header to the back of the Wall Chan-
nel.
2. Cut two (2) slots 1/8” wide X 1-1/2” deep into the top surface of the Gable End Attach Channel. This is
done so the Gable End Attach Channel fi ts around the Wall Channel.
See drawings on next page.
End view of the
Gable End Channel
for the right
side wall Page 15
#12 x 3/4” screw
#12 x 3/4” screw
1/8” 1/8”
1-1/2”
Top view of the
Gable End
Channel Showing
slots