Page 13
Top View
of
Right Wall at Home after Room is Assembled.
Installing a Room with no Solid Panel at the Home Wall
(This is a special application)
1. Floor Channel will be used as Wall Channel in this
application.
2. The Wall Channel will be altered at the factory for
you.
This will allow for a proper fi t in the Floor Channel.
(See Illustration at Right)
3. Drill 13/64” holes starting 2” up from the bottom and
spaced 18” to 24” apart. Final hole 2” from top.
4. Apply a strip of 1” x 1” foam tape
on the back
of the
Wall Channel along the full length of
edge
.
5. Attach Wall Channel to home with #12 x 2” Hex Head Screws.
Floor Channel
Altered Floor Channel
Inside Room
Outside Room
1” x 1”
Trim Angle
1” x 1”
Trim Angle
#12 x 2”
Hex Head
Screw
#8 x 1/2”
Screw
#8 x 1/2”
Screw
Содержание Deluxe Three -Season Sunroom
Страница 4: ...Page 3 Room Assembly...
