APT3200
Smart Pressure Transmitter
Operation Manual M3200-E01G
31
Duon System Co.,Ltd.
4.8.1 Mounting
To use the cadence carrier from the environment where the vibration is heavy and must install
the transmitter. In the environment where the vibration is heavy you will have to install the
transmitter by using an assistant support. In the case of severe vibration, promote to mount on
pipe using a mounting bracket as option.
4.8.2 Consideration of Transmitter Access
When selecting the establishment location or a place of the transmitter, it treats the transmitter
it probably is a location that is convenient must consider.
①
Rotation of housing: housing can be rotated up to 90
°
.
②
Terminal sides of transmitter: location ease us terminal space where be able to pull out
transmitter cover
③
Circuits side of transmitter: the space where there is a possibility of treating a electronic
circuit / the space where be able to pull out transmitter cover / If LCD meter is installed, it
requires extra space.
4.9 Environmental Considerations
4.9.1 Effect of Ambient Temperature
You have to install at -20
℃
~60
℃
(-4~180
℉
), operating ambient temperature range. If predicted
heat seems to exceed or equivalent to ambient temperature range limit, you have to consider
additional method to cutoff the process heat.
4.9.2 Environment of toxic, moisture
Housing of APT-3200 can be protected to moisture or toxic material. Electronic circuit side is
separating from terminal side. When O-ring Seal cover covers, it is intrinsic safety. But, some drip
could penetrate to the housing of transmitter through conduit pipeline. Therefore, transmitter
should be set up over the position of conduit pipe for preventing drip.
4.9.3 Installation of dangerous place
Transmitter is designed to explosion-proof housing. Installation environment of transmitter must
be confirmed explosion-proof specification.
