APT3200
Smart Pressure Transmitter
Operation Manual M3200-E01G
2
Duon System Co.,Ltd.
1.2 Overview of Transmitter
Autrol® Smart Pressure Transmitter based in a microprocessor is the pressure transmitter, has a
designed capacitance sensor optimized for draft measurement. APT-3200 has a true draft analog
range from 0 to 20mA offering that feature that a pressure range or after convert analog range to
HART (Communication) digital signal transmit for control systems like DCS, PLC. This Model has
explosion protected type (Instrinsically Safety) and high precision, better reliabilty and is available on
digital commuication for the use remotes communication system.
This transmitter is enabled in HART commmunication with Host, HHT (HART Hand-Held Terminal), PC
Configurator, or PDA Configurator. Thus, transmitter various variables in host is enable to be changed,
configured and tested calibrated by users. For the HART Communication between DC Power Supply of
24 Vdc and Transmitter has to terminate 250~ 550 Ohm as loop resistance by series connection.
1.3 Software Compatibility
Autrol® Smart Pressure Transmitter's software is implemented and complemented if necssary. Uses of
the transmitter will not be a compatibility software is contained in the host of the HHT(Model 275
HART Communicator). In this case contact us for software DD(Device Descriptor) to be able to use
with the transmitter, you must to use loading in HHT, etc.
There may be some differences on supported fucntions as to Firmware Revision of transmiter. This
manual is based on Firmware Revision 58. Function deviations as to firmware Revision are same as
under box
Function Supports
ZERO / SPAN Botton
FUNCTION
Before Rev. 58
Rev. 58
Autrol PC/PDA
HART 275/375
ZERO/SPAN
●
●
●
●
ZERO TRIM
●
●
●
●
ZERO Adj
●
●
●
●
Units set
ⅹ
●
●
●
Range set
ⅹ
●
●
●
Damping set
ⅹ
●
●
●
LCD Decimal set
ⅹ
●
●
∆
●
:
Supported.
ⅹ
:
Not Supported
∆
: Supported but update required
