Maintenance Manual for DUKE TSC Proofer
Oven with Touch Screen Controls
4
iMPortAnt sAfetY instructions
Throughout this manual, you will find the following safety words and symbols that signify important safety
issues with regards to operating or maintaining the equipment.
wArninG
GenerAl wArninG:
indicates information important to the proper operation of the
equipment. failure to observe may result in damage to the
equipment and/or severe bodily injury or death.
wArninG
indicates information relating to possible shock hazard.
failure to observe may result in damage to the equipment and/or
severe bodily injury or death.
cAution
GenerAl cAution:
indicates information important to the proper operation of the
equipment. failure to observe may result in damage to the
equipment.
wArninG
hot surfAce wArninG:
indicates information important to the handling of equipment and
parts. failure to observe caution could result in personal injury.
In addition to the warnings and cautions in this manual, use the following guidelines for safe operation of
the unit.
• Read all instructions before using equipment.
• Do not attempt to defeat the grounded connector.
• Install or locate the equipment only for its intended use as described in this manual.
• Do not use corrosive chemicals, water jet equipment, or other pressurized liquid spraying equipment
to clean this unit.
• This equipment should be serviced by qualified personnel only. Contact the nearest Duke authorized
service facility for adjustment or repair.
• Do not block any openings on the unit.
• A minimum clearance of 6
″
(152.4 mm) from the top of the unit to the ceiling must be provided.
• Secure unit to a wall with brackets provided to prevent tipping.
• Unit may start operation with inadvertent contact with touch screen display or from other extraneous
sources. Turn off all poles mains disconnects should abnormal or unwanted operation occur.
• Install the Restraining Device Kit to prevent damage to main supply connections.
electricAl
wArninG:
